Our Products

Further information about our products and for ordering our products, please email John Horwood at AquaVic.

Click image to view in new window

AquaVic New Millennium Ioniser package

Pictured here is our recently released New Millennium Ioniser package which is based on APVMA approved “Algae-NON” electrodes*, an approved non-chlorine, liquid sanitiser, and redesigned flowcells. Extensive field testing has found this combination to be an exceptionally effective and low maintenance solution to the question of water quality maintenance. So low in fact, that it has the potential to displace chlorine generators. $POA

AquaVic Flowcells for the Algae-NON electrodes.

Pictured here are the two Flowcells designed to accommodate the Algae-NON electrodes.  Because of their extremely robust construction, they may be installed anywhere in the filtration system – including the high pressure leg between the pump and the filter. A feature of the design is the clear centre section which facilitates ‘anytime’ electrode condition monitoring. $POA

Click image to view in new window

AquaVic C-40 Flowcell

These compact units are designed for in-line mounting in 40 mm PVC pipework. A feature of the design is the clear acrylic high impact mounting plate which also serves as an inspection window for monitoring electrodes. They are supplied with one pair of AquaVic HD Electrodes.

Each C-40 is hydro tested to 350 kPa at assembly, and rated at 250 kPa working pressure.

Although these units have been effectively superseded by the C-40M Flowcell (see below) they are still available on special order. $POA

Aquamatics MK5 Ioniser

These Sydney manufactured units are arguably the highest selling ioniser on the Australian market today, and have evolved form the time-proven MK4, many of which are still in service today. It’s very sophisticated control system gives the owner/operator absolute control over both ionising current and ioniser run time, a feature that makes them suitable for any volume of water, from 100 litres to 100,000 litres. They are designed to drive one pair of electrodes which may either be installed directly into the lid of a pool pump, or in a separate flowcell if required.

Note that for larger bodies of water, the Aquamatics range of ionisers also includes the MK9 and the MK10. Click on this link for full details.

Click image to view in new window

AquaVic C-50 Flowcell

These compact units are designed for in-line mounting in 50 mm PVC pipework and their rugged construction allows then to withstand higher than normal working pressures and water hammer. A feature of the design is the clear acrylic high impact mounting plate which also serves as an inspection window for monitoring electrodes. Although they are designed specifically for swimming pools and spas, they may also be used on water features where high flow rates are a consideration.

Each C-50 is hydro tested to 750 kPa at assembly, and rated at 500 kPa working pressure.

As with the C-40 Flowcell above, these extremely robust units are no longer a stock item, but still available on special order if required. $POA

AquaVic 2C-50 Flowcell

These rugged twin cell units are designed for in-line mounting in 50 mm PVC pipework, but their design makes them particularly well suited to mounting directly on to a 50 mm (swimming pool) pump discharge port. As with the C-40 and the C-50 above, this unit also features clear acrylic high impact mounting plates which also serve as inspection windows.

They are designed for pools larger than the typical domestic pool, but are also ideally suited to controlling algae in large ponds and water features whose water is subjected to ingress of substantial surface run-off or dilution by storm water and heavy rainfall.

Each 2C-50 is hydro tested to 750 kPa at assembly, and rated at 500 kPa working pressure. $POA

Click image to view in new window

Aquavic Blue Label Ioniser — Model ION-01

These units, which were originally designed to satisfy the DIY market, are also proving to be very popular with OEM’s. They are ideal for the small to medium-sized domestic pool, spas, hydrotherapy pools, and are well suited for lap pools.

They may be used with the C-50 Flowcells identified above, or when used in pairs, may be used with the 2C-50. Condition monitoring is via a selection of coloured LED’s for Power, Polarity Switching and Ionising. Unless otherwise requested, a 2 metre power lead with piggy back plug is standard as is the 2 metre “figure 8” low voltage lead. Output is rated at 12 — 16 VDC — 500 mA max. load. $POA